| CLICK for specifications |
 |
 |
 |
 |
 |
 |
 |
 |
|
Drum Filling & Sealing process
Flexitank Filling
Full Flexitank ready for shipping
Emptying of Flexitank
|
|
PowerKing
EHV GRADE TRANSFORMER INSULATING OIL
Consistent Quality
Matchless Performance
Choice of Reputed Customers
PowerKing Transformer Oil was first introduced in 1971. It is one of the quality products distributed by UniKing International and is manufactured in one of the most modern continuous process plants certified under ISO 9001 Quality Systems.
The continuous process ensures consistent quality and conformation to the highest standards, unlike batch processes which may give rise to quality variations between batches.
Rigorously Tested & Widely Used
PowerKing is a product of extensive research and trials, conducted by an R & D department manned by experts who are committed to excellence. The laboratories house some of the most technologically advanced equipments of its kind to exercise uncompromising quality control on the desired technical specifications of PowerKing.
Before despatch each and every lot of PowerKing has to compulsorily undergo the following tests and checks conforming to IEC 60296 or BS 148 specifications for Oxidation Stability, Gas Absorption, Chemical Deterioration, Break Down Voltage, Resistivity, Dielectric Dissipation Factor etc... Besides these test PowerKing is also subject to Physical Characteristic tests that are routine for any Transformer insulating oil. For precisely these reasons, PowerKing has been widely acclaimed by the industry as a superior Insulating Oil with consistent properties. PowerKing is being regularly exported to various electricity boards and other reputed clients around the globe.
 |
PowerKing Transformer Oil was also rigorously tested and approved by KEMA of Netherlands and Doble of USA which are two widely renowned independent laboratories. |
Technical Characteristics of Power King
IEC-60296(2003) - Uninhibited (Class I)
| Property
|
Test Method
|
Limits
|
Typical Values
|
| 1 - Function:
|
| Viscosity at 40°C
|
ISO 3104
|
Max. 12mm²/s
|
7.80
|
| Viscosity at -30°C
|
ISO 3104
|
Max. 1800mm²/s
|
426.4
|
| Pour Point
|
ISO 3016
|
Max. -40°C
|
-42
|
| Water Content
|
IEC 60814
|
Max. 30 mg / kg
|
12
|
| Breakdown voltage
|
IEC 60156
|
Min. 30 kV
|
78
|
| Density at 20°C
|
ISO 3675
|
Max. 0.895 g/ml
|
0.817
|
| Density at 29.5°C
|
|
|
0.8110
|
| DDF at 90°C
|
IEC 60247
|
Max. 0.005
|
0.0004
|
| 2 - Refining / Stability:
|
| Appearance
|
-
|
Clear, free from sediment and suspended matter
|
Clear, free from sediment and suspended matter
|
| Acidity
|
IEC 62021 - 1
|
Max. 0.01 mg KOH/gm
|
0.0012
|
| Interfacial Tension
|
ISO 6295
|
No general requirement
|
-
|
| Total Sulphur Content
|
BS 2000 Part 373 or
ISO 14596
|
No general requirement
|
-
|
| Corrosive Sulphur
|
DIN 51353
|
Not corrosive
|
Not corrosive
|
| Antioxidant additive
|
IEC 60666
|
Not detectable
|
Not detectable
|
| Furfural content
|
IEC 61198
|
Max. 0.1mg/kg
|
Nil
|
| 3 - Performance:
|
Oxidation Stability
a) Total acidity
b) Sludge
c) DDF at 90°C
|
ISO 61125 (method C)
Test duration:
(U) Uninhibited Oil:164h
IEC60247
|
Max, 1.2 mg KOH /gm
Max. 0.8%
Max. 0.500
|
0.18
0.04
0.08
|
| Gassing
|
IEC 60628,A
|
No general requirement
|
-
|
| 4 - Health, safety and environment:
|
| Flash point
|
ISO 2719
|
Min. 135°C
|
154
|
| PCA content
|
BS 2000 Part 346
|
Max. 3 %
|
0.22
|
| PCB content
|
IEC 61619
|
Not detectable
|
Not detectable
|
This transformer Insulating Oil also meets ASTM D3487 type I and AS1767.1-1999
The above data is based on recent average values. Minor variations which do not affect product performance of quality may be expected in manufacture.
PowerKing may also be supplied according to BS 148:1984 and as Inhibited (Class IIA). High Flash Transformer Oil may also be supplied as per customer's specification.
PowerKing may be shipped in new non-returnable Mild-steel drums of 210 litres capacity or in 23-24000 litre Flexitanks, in TEU's.
PowerKing
Offers Seven Distinct Advantages
1. High Volume Resistivity at 27°C & 90°C
High insulation resistance between transformer windings or high megger value.
2. Very low dielectric dissipation factor
Reduces temperature rise during service, because of lower electrical losses.
3. Highly refined Oil
Reduces aromatic content and sulphur content.
Contains very low water content.
4. Low Viscosity & Density
Improves cooling.
5. Conforms to CPRI, CEA, RDSO, REC specifications as well as to
ASTM.D.1934 ageing test
Increases stability and ensures longer life of oil during service.
6. Higher initial interface tension
Smoother functioning of oil with lesser maintenance due to low deterioration.
7. Low S.K. Value
Optimum Refining.
|
|
